5015 threaded connectors - RMS
R.E.C. RMS 5015 connectors (threaded) are designed to be compatible and intermateable with MIL-C-5015 connectors, and therefore mil part numbers beginning MS310 as well as ITT Cannon (CA310), Amphenol (97310) and other commercial equivalents.
Available with threaded or bayonet coupling (bayonet series is RB), these circular connectors are used in a wide range of electronic equipment where reliability and environmental protection are required. RMS 5015 connectors (threaded) are designed according to MIL-C-5015 specification and comply with all its requirements of performance and reliability.
Specially designed for military applications, nowadays widely used also in industry where strength and reliablity are essential. A wide range of accessories allows to use these connectors in any enviroment, while a high number of contact arrangements covers every need of the customer.
These connectors may terminate using crimp or soder copper alloy contacts with silver or gold plating and also thermocouple contacts. RMS 5015 threaded connectors series is the best solution for a high number of applications in various areas.
There are also a range of platings available, which gives you the option of RoHS compliance.
RB series (reverse bayonet) – REC RB series (5015 reverse bayonet)
Our other REC branded products – REC branded
OVERVIEW
CONTACT TERMINATION: solder or crimp
MATING STYLE: threaded
IP RATING: IP67 (with PHM adapter)
MIL EQUIVALENT: MS310
PLUGS
RMS3106
Style: straight plug
Accessory thread? yes
Mil equivalent: MS3106
RMS3108
Style: 90 degree plug
Accessory thread? yes
Mil equivalent: MS3108
RECEPTACLES
RMS3101
Style: in-line receptacle
Accessory thread? yes
Mil equivalent: MS3101
RMS3102
Style: box mount receptacle
Accessory thread? no
Mil equivalent: MS3102
CONNECTOR CLASS
| Reference | Connector Class |
| A | Includes backshell for cable clamp. |
| AR | Insert and Grommet with Grommet Nut. |
| F | Includes insulating grommet, backshell and class A cable clamp MS 3057. |
| GR | Includes wire sealing grommet and backshell with rotating clamp nut for heat shrink tubing. |
| R | Includes insulating grommet and backshell. For use with individual wires. |
| A … CGM | For Shielded or Unshielded Cables. Includes a CGM cable clamp for shielded or unshielded cables, thatassuresan excellent mechanical and waterproof seal if used with the correct neoprene sealing sleeves. No grommet supplied. |
| A … PG | Backshell for use with PG cable glands (not included). Other types of PG adaptors can be supplied invarioussizes upon request. |
| A … M | Backshell for use with metric cable glands (not included). Other types of adaptors can be supplied invarioussizes upon request. |
| Omitted | Connector Without Backshell |
LAYOUTS
| Insert Arrangement | Contact Size | ||||||
| Service Rating | Total Contacts | 0 | 4 | 8 | 12 | 16 | |
| 10S – 2 | A | 1 | – | – | – | – | 1 |
| 10SL – 3 | A | 3 | – | – | – | – | 3 |
| 10SL – 4 | A | 2 | – | – | – | – | 2 |
| 14S – 2 | Inst. | 4 | – | – | – | – | 4 |
| 14S – 4 | D | 1 | – | – | – | – | 1 |
| 14S – 5 | Inst. | 5 | – | – | – | – | 5 |
| 14S – 6 | Inst. | 6 | – | – | – | – | 6 |
| 14S – 7 | A | 3 | – | – | – | – | 3 |
| 14S – 9 | A | 2 | – | – | – | – | 2 |
| 16S – 1 | A | 7 | – | – | – | – | 7 |
| 16S – 4 | D | 2 | – | – | – | – | 2 |
| 16S – 5 | A | 3 | – | – | – | – | 3 |
| 16S – 8 | A | 5 | – | – | – | – | 5 |
| 16 – 9 | A | 4 | – | – | – | 2 | 2 |
| 16 – 10 | A | 3 | – | – | – | 3 | – |
| 16 – 11 | A | 2 | – | – | – | 2 | – |
| 16 – 12 | A | 1 | – | 1 | – | – | – |
| 16 – 13 | A | 2 | – | – | – | 2 | – |
| 18 – 1 | A/Inst. | 10 | – | – | – | – | 10 |
| 18 – 3 | D | 2 | – | – | – | 2 | – |
| 18 – 4 | D | 4 | – | – | – | – | 4 |
| 18 – 5 | D | 3 | – | – | – | 2 | 1 |
| 18 – 8 | A | 8 | – | – | – | 1 | 7 |
| 18 – 10 | A | 4 | – | – | – | 4 | – |
| 18 – 11 | A | 5 | – | – | – | 5 | – |
| 18 – 12 | A | 6 | – | – | – | – | 6 |
| 20 – 3 | D | 3 | – | – | – | 3 | – |
| 20 – 4 | D | 4 | – | – | – | 4 | – |
| 20 – 7 | D/A | 8 | – | – | – | – | 8 |
| 20 – 14 | D | 5 | – | – | 2 | 3 | – |
| 20 – 15 | A | 7 | – | – | – | 7 | – |
| 20 – 17 | A | 6 | – | – | – | 5 | 1 |
| 20 – 18 | A | 9 | – | – | – | 3 | 6 |
| 20 – 19 | A | 3 | – | – | 3 | – | – |
| 20 – 23 | A | 2 | – | – | 2 | – | – |
| 20 – 27 | A | 14 | – | – | – | – | 14 |
| 20 – 29 | A | 17 | – | – | – | – | 17 |
| 20 – 33 | A | 11 | – | – | – | – | 11 |
| 22 – 2 | D | 3 | – | – | 3 | – | – |
| Insert Arrangement | Contact Size | ||||||
| Service Rating | Total Contacts | 0 | 4 | 8 | 12 | 16 | |
| 22 – 7 | E | 1 | – | – | – | – | 1 |
| 22 – 9 | E | 3 | – | – | – | 3 | – |
| 22 – 10 | E | 4 | – | – | – | – | 4 |
| 22 – 14 | A | 19 | – | – | – | – | 19 |
| 22 – 18 | D/A | 8 | – | – | – | – | 8 |
| 22 – 19 | A | 14 | – | – | – | – | 14 |
| 22 – 20 | A | 9 | – | – | – | – | 9 |
| 22 – 22 | A | 4 | – | – | 4 | – | – |
| 22 – 23 | D/A | 8 | – | – | – | 8 | – |
| 22 – 33 | D/A | 7 | – | – | – | – | 7 |
| 22 – 34 | D | 5 | – | – | – | 3 | 2 |
| 24 – 2 | D | 7 | – | – | – | 12 | – |
| 24 – 5 | A | 16 | – | – | – | – | 16 |
| 24 – 9 | A | 2 | – | 2 | – | – | – |
| 24 – 10 | A | 7 | – | – | 7 | – | – |
| 24 – 11 | A | 9 | – | – | 3 | 6 | – |
| 24 – 12 | A | 5 | – | 2 | – | 3 | – |
| 24 – 22 | D | 4 | – | – | 4 | – | – |
| 24 – 27 | E | 7 | – | – | – | – | 7 |
| 24 – 28 | Inst. | 24 | – | – | – | – | 24 |
| 28 – 3 | E | 3 | – | – | 3 | – | – |
| 28 – 10 | D/A | 7 | – | 2 | 2 | 3 | – |
| 28 – 11 | A | 22 | – | – | – | 4 | 18 |
| 28 – 12 | A | 26 | – | – | – | – | 26 |
| 28 – 15 | A | 35 | – | – | – | – | 35 |
| 28 – 16 | A | 20 | – | – | – | – | 20 |
| 28 – 18 | C/D/A/Inst. | 12 | – | – | – | – | 12 |
| 28 – 20 | A | 14 | – | – | – | 10 | 4 |
| 28 – 21 | A | 37 | – | – | – | – | 37 |
| 28 – 22 | D | 6 | – | 3 | – | – | 3 |
| 32 – 4 | A/D | 14 | – | – | – | 2 | 12 |
| 32 – 7 | A/Inst. | 35 | – | – | – | 7 | 28 |
| 32 – 9 | D | 14 | – | 2 | – | – | 12 |
| 32 – 17 | D | 4 | – | 4 | – | – | – |
| 36 – 5 | A | 4 | 4 | – | – | – | – |
| 36 – 9 | A | 31 | – | 1 | 2 | 14 | 14 |
| 36 – 10 | A | 48 | – | – | – | – | 48 |
| 36 – 52 | A | 52 | – | – | – | – | 52 |